M34 Optical Filters for Machine Vision

M34 optical filters fit industrial camera lenses with a compatible 34 mm filter thread. They are used to control the light reaching the camera sensor, helping improve contrast and reduce unwanted illumination during automated visual inspection.

Our M34 range includes bandpass filters for different LED wavelengths. Available filters are listed in the product overview below.

 

Filter Mounting and Lens Compatibility

Our M34 bandpass filters have an M34 × 0.5 thread, with a nominal diameter of 34 mm and a thread pitch of 0.5 mm. Check the lens specifications before mounting the filter, as both dimensions must match.

The clear aperture and filter housing should also be considered to prevent vignetting or mechanical interference with the lens.

 

Choosing an M34 Optical Filter

For applications using LED illumination, a bandpass filter can help isolate the required wavelength and reduce the influence of light outside its transmission range. The filter should be selected according to the illumination spectrum, camera sensitivity and inspection task.

 

Our Optical Filters Selection Guide explains the differences between bandpass, longpass, shortpass and polarising filters.

For other filter thread sizes, explore our range of optical filters.