M40.5 Optical Filters for Machine Vision

M40.5 optical filters are used with industrial camera lenses equipped with a compatible 40.5 mm filter thread. They allow specific wavelengths to be selected or unwanted reflections to be reduced, helping improve contrast and image quality in machine vision applications.

Our M40.5 range includes bandpass filters for different LED wavelengths and a linear polarising filter. The available models can be compared in the product tables below.

 

M40.5 Filter Thread and Lens Compatibility

Our M40.5 bandpass filters have an M40.5 × 0.5 thread, with a nominal diameter of 40.5 mm and a thread pitch of 0.5 mm. This filter size is used on various industrial C-mount lenses, including selected RICOH/OPTOWL models.

Before selecting a filter, verify the lens thread diameter and pitch. Also check the filter's clear aperture and housing dimensions, particularly when working with wide-angle lenses or larger image sensors.

 

Choosing the Right M40.5 Optical Filter

Bandpass filters are typically combined with LED illumination of a corresponding wavelength. They transmit a defined spectral range while reducing light outside that range, helping limit the influence of ambient illumination during automated inspection.

Linear polarising filters can reduce unwanted reflections from glass, plastic and other reflective surfaces. For some applications, combining the filter with polarised illumination provides better reflection control.

The choice depends on the illumination spectrum, camera sensitivity and inspection requirements. Our Optical Filters Selection Guide provides further information about different filter types and their applications.

 

Looking for another filter thread size? Explore our complete range of optical filters.